Erasing Hatch Patterns in AutoCAD

Select hatch patterns for erasing with any of the standard selection methods. If the hatch is associative and the PICKSTYLE system variable is set to 2 or 3, you will also erase the boundary. If you want to retain the boundary, set PICKSTYLE to 0 or 1.

To erase a hatched area

  1. From the Modify menu, choose Erase.
  2. Select the hatch pattern to erase.
  3. Press ENTER.

Command line ERASE
Shortcut menu Select the hatch pattern to erase, right-click in the drawing area, and choose Erase.


There are no comments yet...Kick things off by filling out the form below.

Leave a Comment